Separation 802 refers to the vertical distance between aircraft in flight, measured in hundreds of feet. When air traffic control issues a separation 802 instruction, it means that aircraft should maintain a vertical separation of 800 feet above and 200 feet below another aircraft. This separation is crucial for ensuring the safety of aircraft in the airspace and preventing mid-air collisions. **

The Behringer Xenyx 802 may be buzzing due to a few potential reasons. It could be caused by a ground loop issue, where there is interference from multiple grounded devices. It could also be due to a faulty cable or connection, causing electrical interference. Additionally, the buzzing could be a result of the gain levels being set too high, causing feedback and noise. Troubleshooting these potential issues and adjusting the settings may help resolve the buzzing problem. **

The Behringer Xenyx 802 may be humming due to a ground loop issue, where there is interference from multiple electrical devices causing a low-frequency hum. This can be resolved by ensuring all equipment is properly grounded and using balanced cables. Additionally, the humming may be caused by a faulty power supply or cables, so checking and replacing these components may help eliminate the noise. **

I recommend the Lenovo ThinkPad X1 Carbon for 802. This notebook is lightweight, durable, and has a long battery life, making it perfect for on-the-go use. It also has a powerful processor and ample memory, allowing for smooth multitasking and efficient performance. Additionally, the ThinkPad X1 Carbon has a high-resolution display and a comfortable keyboard, making it a great choice for both work and leisure activities. **

No, the Easybox 802 is not designed to support VDSL. It is a DSL modem/router that is specifically designed to work with ADSL and ADSL2+ connections. VDSL requires a different type of modem/router that is specifically designed to support the higher speeds and different technology of VDSL connections. If you have a VDSL connection, you will need to use a VDSL-compatible modem/router in order to connect to the internet. **

When choosing a power supply for a laptop with 65W instead of 90W, it's important to ensure that the voltage and polarity of the new power supply match the requirements of the laptop. Additionally, the new power supply should have a compatible connector to the laptop's power input. It's also important to consider the charging time and performance of the laptop with the lower wattage power supply. It's recommended to consult the laptop's manufacturer or a certified technician to ensure compatibility and safety. **

The Behringer Xenyx 802 may make a noise due to a variety of reasons, including interference from other electronic devices, ground loop issues, or faulty cables. Additionally, the noise could be caused by the gain levels being set too high, or by the presence of phantom power when using condenser microphones. It is important to troubleshoot and identify the specific cause of the noise in order to address and resolve the issue. **

To set up the Behringer Xenyx 802 mixer, start by connecting your microphones, instruments, and other audio sources to the appropriate input channels on the mixer. Next, connect the main outputs of the mixer to your speakers or recording device using the appropriate cables. Adjust the input gain knobs for each channel to set the desired input levels, and use the EQ and other controls to fine-tune the sound. Finally, adjust the main output level and monitor levels to ensure a balanced mix. Make sure to refer to the user manual for detailed instructions on setting up the Behringer Xenyx 802. **